hp support number

How to Install Windows 10 from a USB Flash Drive?

This entire process is going to delete all the information on your hard drive that is there at the moment so make you have a backup of all your files and folders and data.

Before we go ahead, you need to check what type of OS (operating system) you are using, 64 or 32 BIT.

Right click on “this PC”, go to properties at the bottom,

There you will find the information if your system is 64 bit or 32.

Now, go to the download section windows 10 on Microsoft website, download accordingly, once downloaded, run it. Once you have screen where it says, what you want to do?

Select “Create installation media for another PC”. Click next.

Select language (English), edition (windows 10 pro), and architecture (64 BIT), now click next again.

From this screen, “choose which media to use”, select USB flash drive and hit next.

Make sure your USB flash drive is connected.

Now click next to start windows 10 installation from the USB drive. Once completed 100%, click finish.

Now you need to change the boot sequence from the BIOS to be able to boot from the USB drive.

Now when you boot the PC, select F12 boot menu, now from the BIOS setup utility screen, under boot option, select removable device, save configuration and exit now by clicking yes.

Once you save those settings, computer will restart and it will boot from that USB drive.

From here, just follow the onscreen instruction advice like selecting time, language etc.options. Now click Install now.

Select custom install windows only advanced option. Now you will see “where do you want to install windows”?

Delete the existing drives, but make sure to take back of those, else you’ll end up losing your data.

Now you’ll see a single unallocated space, select it, click next.

You will see “Installing Windows” It will take a while.

Remember, it’s going to restart several times, so if its restarting do not worry. Also, if it prompts you to press any key, do NOT press any key. Let it continue.

If it asks you to enter the product key, click on skip or do it later.

Then, click on use express settings. Click on proceed.

You will now see a screen where it will ask you “who owns this PC”, click on I own it, and click next.

Skip the step where it asks you to put in Microsoft id and password.

Next screen, it will ask you to “create an account for this PC”, fill it or skip it as you like.

Click next, it will start setting things for you.

In a matter of 5 minutes, it will be completely setup and you will be able to use your PC.

hp printer technical solutions

How To Fix a Paper Jam on the HP DeskJet 2600 All-in-One Printer Series?

How To Fix a Paper Jam on the HP DeskJet 2600 All-in-One Printer Series?

If your HP DeskJet 2600 printer stops feeding pages while printing and the printer control panel displays an E4 with the resume light blinking, paper is jammed.
Remove any jams clear the error to resume printing. Check the input tray and the output tray, ink cartridge area and bottom of the printer and remove any jammed paper. Lift the input tray shield and shine a flashlight inside the area and remove any obstruction if found. Shine the flashlight outside the output tray, and remove any jammed paper, if found.

With the HP printer still on, disconnect all cables along with unplugging power cord from the main socket. You must disconnect the printer power cord from its power source to make sure to avoid any damage to the printer.
From the front, open ink cartridge door, slide cartridge all the way to the right, and all the way to the left, remove any obstruction if found. Put it back, close the ink door.
Access the bottom of the printer, push down the two tabs on the cleanout door to open it. Remove any jammed paper found. Push the door back to close it.

Plug back in the power cord, switch it on, raise the input tray, load the paper. Open the output tray, try to print a document. It will print this time.
For more information, visit www.printermil.com

Find out flash sale on HP printer ink and ink cartridge. Click Here for best deals.

hp printer support number

How To Set Up a Wireless HP Printer Using HP Smart in Windows 10

Follow HP Printer Support instructions. From windows 10, setup an HP printer and connect it to your wireless home or business network using HP smart. You need below information to be able to connect wirelessly successfully.

  • A network connected windows 10 computer.
  • An HP printer powered on.
  • Active internet connection.
  • Wireless password or key.

 

On your windows 10 computer, open HP smart app. It comes pre-installed on most of the computers. If its not installed, download it from the Microsoft store. Open up, select start, agree to terms and conditions, and then proceed.

HP smart app searches for the hp printers connected to the network. Select plus sign to find your new printer. If you have another printer on the network, select add printer not listed, and then setup new printer. Else select setup new printer.

To detect new printer in HP smart, the printer must be in setup mode. Setup mode automatically when turning on your printer for the first time but is only activated for 2 hours. If your printer is in setup mode, reset the network settings.

For hp printers with buttons only, press the cancel button to wake the printer from sleep mode. Press and hold the wireless and cancel buttons at the same time for 5 seconds. Release the button to reset the network settings.

For HP printers with an LCD or text display, navigate to the wireless or network settings menu. Select restore network settings.

The app finds your printer in setup mode. If your printer is still not found, select printer not listed. Otherwise, verify the printer shown is the one you want to setup then select continue.

To connect the printer to the same network as the computer, enter the wireless password if prompted, tap continue. HP smart finds the printer, prepares it for the the connection. With the printer successfully connected to the network, reconnect the computer to the network.

From HP smart, open network settings. Select show available networks,  with the computer back on the network, return to HP smart, select done. With all connections established, select continue. If prompted, follow instructions and videos to install cartridges and the load paper into your printer. Don’t forget to adjust paper guides to prevent jams.

With paper loaded, select continue, follow any prompts to get to the screen with instructions on adding the printer to the printers, and scanners list in windows. Select open window settings, in the printers scanners list, select add a printer or scanner. Select the HP printer listed in HP smart, select add device. The printer software installs, and the printer is added, to the print queue.

Return to HP smart, select continue, HP smart displays the tasks and settings for your printer. Print, scan and adjust printer settings directly from HP smart.

Know more on www.printermil.com

printer support

How to Set Up a Wireless HP Printer from an iPad or iPhone

From an iPad or iPhone, setup an HP printer and connect it to your wireless home or business network using an ipad or iphone.
To be able to setup and install your printer, gather the following information.
• A network connected ipad or iphone.
• An HP printer powered on.
• Active internet connection.
• ‘Wireless password.

On your ipad or iphone. Open browser, go to 123.hp.com. Official HP Printer Support website will not charge anything for the services. Tap get the app to install HP smart from the app store. With HP smart installed, tap the icon to open it, accept terms conditions, proceed to start. Allow notifications.

To detect new hp printer HP smart app, printer must be in the setup mode. Setup mode activates automatically when turning on your printer for the first time, but is only activated for 2 hours. If not sure if its been 2 hours, reset printer network settings.
For hp printers with buttons only, press the cancel button to wake the printer from sleep mode. Press and hold the wireless and cancel buttons at the same time for 5 seconds. Release the button to reset the network settings.

For HP printers with an LCD or text display, navigate to the wireless or network settings menu. Select restore network settings.
Now return to HP smart app., tap plus sign to add your printer to HP smart app. Go to phone settings, open wifi, select hp network. Return to HP smart, verify network shown where you want to connect. Choose the correct network. Enter the wireless network password, tap done or continue. HP smart finds the printer, prepares it for the connection, gathers additional information, and finishes the connection.
Reconnect your iOS device to the original wi-fi network. Return to HP smart, and the printer connected to the wireless network, tap continue. If prompted, follow the instructions and videos to install cartridges and load paper into your printer.

Don’t forget to adjust the paper guides to prevent jams and skewing. With paper loaded, follow the remaining prompts to setup any available services on software.

Your HP printer setup is complete. You can now print photos, documents directly from HP smart or install hp printer on your computer or other mobile devices.