Posts

How To Set Up a Wireless HP Printer Using HP Smart in Windows 10

Follow HP Printer Support instructions. From windows 10, setup an HP printer and connect it to your wireless home or business network using HP smart. You need below information to be able to connect wirelessly successfully.

  • A network connected windows 10 computer.
  • An HP printer powered on.
  • Active internet connection.
  • Wireless password or key.

 

On your windows 10 computer, open HP smart app. It comes pre-installed on most of the computers. If its not installed, download it from the Microsoft store. Open up, select start, agree to terms and conditions, and then proceed.

HP smart app searches for the hp printers connected to the network. Select plus sign to find your new printer. If you have another printer on the network, select add printer not listed, and then setup new printer. Else select setup new printer.

To detect new printer in HP smart, the printer must be in setup mode. Setup mode automatically when turning on your printer for the first time but is only activated for 2 hours. If your printer is in setup mode, reset the network settings.

For hp printers with buttons only, press the cancel button to wake the printer from sleep mode. Press and hold the wireless and cancel buttons at the same time for 5 seconds. Release the button to reset the network settings.

For HP printers with an LCD or text display, navigate to the wireless or network settings menu. Select restore network settings.

The app finds your printer in setup mode. If your printer is still not found, select printer not listed. Otherwise, verify the printer shown is the one you want to setup then select continue.

To connect the printer to the same network as the computer, enter the wireless password if prompted, tap continue. HP smart finds the printer, prepares it for the the connection. With the printer successfully connected to the network, reconnect the computer to the network.

From HP smart, open network settings. Select show available networks,  with the computer back on the network, return to HP smart, select done. With all connections established, select continue. If prompted, follow instructions and videos to install cartridges and the load paper into your printer. Don’t forget to adjust paper guides to prevent jams.

With paper loaded, select continue, follow any prompts to get to the screen with instructions on adding the printer to the printers, and scanners list in windows. Select open window settings, in the printers scanners list, select add a printer or scanner. Select the HP printer listed in HP smart, select add device. The printer software installs, and the printer is added, to the print queue.

Return to HP smart, select continue, HP smart displays the tasks and settings for your printer. Print, scan and adjust printer settings directly from HP smart.

Know more on www.printermil.com

How to Set Up a Wireless HP Printer from an iPad or iPhone

From an iPad or iPhone, setup an HP printer and connect it to your wireless home or business network using an ipad or iphone.
To be able to setup and install your printer, gather the following information.
• A network connected ipad or iphone.
• An HP printer powered on.
• Active internet connection.
• ‘Wireless password.

On your ipad or iphone. Open browser, go to 123.hp.com. Official HP Printer Support website will not charge anything for the services. Tap get the app to install HP smart from the app store. With HP smart installed, tap the icon to open it, accept terms conditions, proceed to start. Allow notifications.

To detect new hp printer HP smart app, printer must be in the setup mode. Setup mode activates automatically when turning on your printer for the first time, but is only activated for 2 hours. If not sure if its been 2 hours, reset printer network settings.
For hp printers with buttons only, press the cancel button to wake the printer from sleep mode. Press and hold the wireless and cancel buttons at the same time for 5 seconds. Release the button to reset the network settings.

For HP printers with an LCD or text display, navigate to the wireless or network settings menu. Select restore network settings.
Now return to HP smart app., tap plus sign to add your printer to HP smart app. Go to phone settings, open wifi, select hp network. Return to HP smart, verify network shown where you want to connect. Choose the correct network. Enter the wireless network password, tap done or continue. HP smart finds the printer, prepares it for the connection, gathers additional information, and finishes the connection.
Reconnect your iOS device to the original wi-fi network. Return to HP smart, and the printer connected to the wireless network, tap continue. If prompted, follow the instructions and videos to install cartridges and load paper into your printer.

Don’t forget to adjust the paper guides to prevent jams and skewing. With paper loaded, follow the remaining prompts to setup any available services on software.

Your HP printer setup is complete. You can now print photos, documents directly from HP smart or install hp printer on your computer or other mobile devices.

How To Connect a Mobile Device to your HP Sprocket Photo Printers

Connect your mobile device to your sprocket to snap pictures, make fun edits and fun design and then print right from the sprocket app. Get hp printer support anytime.

 

Download the HP Sprocket app from hpsprocket.com/start or from your mobile device store.

Once you install the app, grab your sprocket and turn it on. On your mobile device, open settings and turn on the Bluetooth. This might take 10 seconds for your sprocket to appear. Once it appears, select HP Sprocket, your mobile device and sprocket printer connects automatically. If prompted, allow the device and sprocket to communicate. Verify the connection in sprocket app, tap the menu icon, if you see a green dot and the word connected, you’re good to go.

 

For any device connection issues, getting the latest firmware might resolve the problem. Before you update your printer firmware, check the battery percentage, make sure it’s charged 50%. From the sprocket app screen, tap the menu icon, tap sprocket, tap printers. If there’s an update available, select it and wait for the update to finish. Don’t close the app until the update is completed.

 

Now you can take photos from your device, send them to your sprocket, an just print them whenever you want.

Know more at http://www.printermil.com/

How to Scan From an HP Printer to a Mobile Device Using HP Smart?

How to Scan From an HP Printer to a Mobile Device Using HP Smart with HP Printer Support Customer care

One Of the best HP printer tech support customer care service in Canada and HP printer toll-free Number in Canada. HP Printer tech support is the solution of app printer problem and wireless printer setup.

Scan photos or documents from your HP Printer to your android phone, iPhone or iPad using the HP smart app.

For this, HP smart app must be installed on your device & your printer must be set up in the app.

For Printers with the scanner glass, lift up the scanner glass lid. Place the document or photo to scan in the automatic document feeder or on the scanner glass using the guides for correct placement.

For printers with a scrolling scanner, load the document or the photo to scan the print side up and flush against the paper guide on the right side of the scanner.

The printer pulls the document or photo partially into the scanner and the scanning light brightens.

Now on your device, open HP smart app and tap the scanned tile.

For iPhones or iPads, set the capture source to a scanner. Tap the settings icon and choose the scan source or input source. Adjust any other desired scan settings and then tap done or close.

For iPhones or iPads, tap the blue shutter button to begin the scan. For Android, tap begins the scan to begin the scanning.

From the preview, tap the edit icon to change any desired changes or settings and tap done.

To scan any additional pages, tap additional pages icon.

With all pages scanned, you can rename your scan, save print and share it through HP smart.

HP printer support Customer care service and HP printer support Toll-Free Number in Canada and HP Printer Tech support Phone Number in Canada.

How to Install HP Printer with the Windows Print Driver?

How to Install HP Printer with the Windows Print Driver?

You can install an HP Printer without any software by using the drivers built into the Windows operating system. The windows print drivers only provide basic functionality for HP printers.

Before installing your printer, make sure it is not connected to your PC with a USB cord. If connected previously, please disconnect it. Click the windows icon on your computer, type in change device installation setting, and then select change device installation settings from the list of results. From the device installation settings, select yes. Hit save changes.

Now connect your printer to the same wireless or wired network as your PC is. You can also setup a wireless network connection using the wireless setup wizard on your printer control panel. If connecting your printer to your PC with a USB cord, connect the square end of the cable to the printer and the flat end to the computer. Windows detects the printer through the new connection & installs the driver.

If a “new hardware found” appears on the screen, follow any instructions and complete the installation. Try now to print any document, if it happens, means it is finished. If however, it does not print, click the windows button, type in device and printers and select it from the results. Hit add a printer. Select your printer from the list, click your device, and install drivers and follow the instructions. Click Finish to complete the installation.

If still in doubt, call HP Printer support contact number at toll-free 1-866-724-8600. Our hp printer technical support expert every time ready for your help. Hp printer technical support Customer service in Canada.