Posts

How To Set Up a Wireless HP Printer Using HP Smart in Windows 10

Follow HP Printer Support instructions. From windows 10, setup an HP printer and connect it to your wireless home or business network using HP smart. You need below information to be able to connect wirelessly successfully.

  • A network connected windows 10 computer.
  • An HP printer powered on.
  • Active internet connection.
  • Wireless password or key.

 

On your windows 10 computer, open HP smart app. It comes pre-installed on most of the computers. If its not installed, download it from the Microsoft store. Open up, select start, agree to terms and conditions, and then proceed.

HP smart app searches for the hp printers connected to the network. Select plus sign to find your new printer. If you have another printer on the network, select add printer not listed, and then setup new printer. Else select setup new printer.

To detect new printer in HP smart, the printer must be in setup mode. Setup mode automatically when turning on your printer for the first time but is only activated for 2 hours. If your printer is in setup mode, reset the network settings.

For hp printers with buttons only, press the cancel button to wake the printer from sleep mode. Press and hold the wireless and cancel buttons at the same time for 5 seconds. Release the button to reset the network settings.

For HP printers with an LCD or text display, navigate to the wireless or network settings menu. Select restore network settings.

The app finds your printer in setup mode. If your printer is still not found, select printer not listed. Otherwise, verify the printer shown is the one you want to setup then select continue.

To connect the printer to the same network as the computer, enter the wireless password if prompted, tap continue. HP smart finds the printer, prepares it for the the connection. With the printer successfully connected to the network, reconnect the computer to the network.

From HP smart, open network settings. Select show available networks,  with the computer back on the network, return to HP smart, select done. With all connections established, select continue. If prompted, follow instructions and videos to install cartridges and the load paper into your printer. Don’t forget to adjust paper guides to prevent jams.

With paper loaded, select continue, follow any prompts to get to the screen with instructions on adding the printer to the printers, and scanners list in windows. Select open window settings, in the printers scanners list, select add a printer or scanner. Select the HP printer listed in HP smart, select add device. The printer software installs, and the printer is added, to the print queue.

Return to HP smart, select continue, HP smart displays the tasks and settings for your printer. Print, scan and adjust printer settings directly from HP smart.

Know more on www.printermil.com

How to Set Up a Wireless HP Printer from an iPad or iPhone

From an iPad or iPhone, setup an HP printer and connect it to your wireless home or business network using an ipad or iphone.
To be able to setup and install your printer, gather the following information.
• A network connected ipad or iphone.
• An HP printer powered on.
• Active internet connection.
• ‘Wireless password.

On your ipad or iphone. Open browser, go to 123.hp.com. Official HP Printer Support website will not charge anything for the services. Tap get the app to install HP smart from the app store. With HP smart installed, tap the icon to open it, accept terms conditions, proceed to start. Allow notifications.

To detect new hp printer HP smart app, printer must be in the setup mode. Setup mode activates automatically when turning on your printer for the first time, but is only activated for 2 hours. If not sure if its been 2 hours, reset printer network settings.
For hp printers with buttons only, press the cancel button to wake the printer from sleep mode. Press and hold the wireless and cancel buttons at the same time for 5 seconds. Release the button to reset the network settings.

For HP printers with an LCD or text display, navigate to the wireless or network settings menu. Select restore network settings.
Now return to HP smart app., tap plus sign to add your printer to HP smart app. Go to phone settings, open wifi, select hp network. Return to HP smart, verify network shown where you want to connect. Choose the correct network. Enter the wireless network password, tap done or continue. HP smart finds the printer, prepares it for the connection, gathers additional information, and finishes the connection.
Reconnect your iOS device to the original wi-fi network. Return to HP smart, and the printer connected to the wireless network, tap continue. If prompted, follow the instructions and videos to install cartridges and load paper into your printer.

Don’t forget to adjust the paper guides to prevent jams and skewing. With paper loaded, follow the remaining prompts to setup any available services on software.

Your HP printer setup is complete. You can now print photos, documents directly from HP smart or install hp printer on your computer or other mobile devices.

How To Connect a Mobile Device to your HP Sprocket Photo Printers

Connect your mobile device to your sprocket to snap pictures, make fun edits and fun design and then print right from the sprocket app. Get hp printer support anytime.

 

Download the HP Sprocket app from hpsprocket.com/start or from your mobile device store.

Once you install the app, grab your sprocket and turn it on. On your mobile device, open settings and turn on the Bluetooth. This might take 10 seconds for your sprocket to appear. Once it appears, select HP Sprocket, your mobile device and sprocket printer connects automatically. If prompted, allow the device and sprocket to communicate. Verify the connection in sprocket app, tap the menu icon, if you see a green dot and the word connected, you’re good to go.

 

For any device connection issues, getting the latest firmware might resolve the problem. Before you update your printer firmware, check the battery percentage, make sure it’s charged 50%. From the sprocket app screen, tap the menu icon, tap sprocket, tap printers. If there’s an update available, select it and wait for the update to finish. Don’t close the app until the update is completed.

 

Now you can take photos from your device, send them to your sprocket, an just print them whenever you want.

Know more at http://www.printermil.com/

How to Install a Wireless HP Printer with a USB Cable in Windows?

How to Install a Wireless HP Printer with a USB Cable in Windows?

One of the best HP printers Technical support customer care service in Canada. Installing a wireless HP printer with a USB cord in windows platform, connect it to your wireless network with a temporary USB connection.

First, Power on the printer. Please note, DO NOT connect USB cable until prompted to do so in the installation. If you had previously connected it, please disconnect it now. Navigate it to the necessary driver installation file on your computer that can be downloaded from support.hp.com.

Open the file to start with extracting the installer. Windows might ask you to confirm if you want to open the file or allow changes to be made to your computer. Click continue or yes, to begin with, the installation. If a 1, 2, 3 screen appears to connect, click on continue.

From the software selection screen, you can customize software installation. HP highly recommends you to install all software to get the most out of your HP printer. Click on terms and conditions to agree to it and begin with the installation process. It will now start installing. On the connection screen, select wireless and continue. The installer will check your network configuration. When prompted, connect with the USB cable. Square end to the printer, flat end to the system port. The installer detects the printer. Click on allow access. Select yes to confirm wireless settings, and hit continue. It will now complete the network connection.

Now disconnect the USB cord from the printer and the computer. Click next and installation of your new printer is now complete. With the printer installed on your system, it will automatically open the HP printer assistant. HP printer assistant allows you to check the printer connection, ink level, adjusting on various feature options available, scanning options, color options, etc.

The printer is now ready to be used. However, if still in doubt, or could not complete the installation, please call the HP printer support toll free number on 1-866-724-8600.

How to Install HP Printer With a USB Connection Using Basic Drivers?

How to Install HP Printer With a USB Connection Using Basic Drivers?

One of best HP Printer Technical support customer service in Canada and We solve some printer problem issue like as printer troubleshooting, printer not printing, wireless printer setup, printer installations and drivers updates.  Install your HP printer with a basic driver, that allows you to print & scan, but does not include any additional HP software.

Power on your computer first, do not connect the USB cord until prompted in the installation. If you had previously connected the USB cable, disconnect it. Navigate the necessary driver installation file on your PC that can be downloaded from support.hp.com. Open the file to begin extracting the installer. Allow any changes to be on your computer if prompted. Click yes to continue and run the installation.

If a screen appears, click continue. Accept all terms and conditions. The basic driver installs on your computer. When prompted, connect the USB cable. Square end of the printer, flat end to the back of the CPU. The installer detects the printer through the new connection and continues installation. Remaining screens on the installer might differ depending on your printer. Follow any prompts for printer installation if appears on the screen.

With the printer installed, HP printer assistant opens automatically. HP printer assistant allows you to view the various tool options, ink level, adjust printing options. It’s a very helpful tool.

Your HP printer is now ready to be used. If in doubt or still can’t do it, please call HP printer support toll free number on 1-866-724-8600. Our Printer customer available for 24/7 hour. Any related to printer query please write the comment box and call the hp printer help support number.